Stalagmite      Pouring Standard Impressions (using the Pouring Jig)

Pouring Arch Impressions:


The RTP_Base is lowered into position by applying downward pressure to the YELLOW SWING-ARM while lightly tapping the RTP_Base on the side with a spatula or similar instrument. This will settle the RTP_Base into position until the yellow Swing-Arm "stops" makes contact with the green Stand (see red arrow on right side of picture).

Caution: Do not push down on the Mounting-Plate that is holding the RTP_Base. If you do, it will bend down and then spring back up when pressure is released. This will take the stone out of compression and pull it away from the RTP_Base while increasing the possibility for other voids. Put downward pressure on the yellow Swing-Arm only.

Home     Page > 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26