Exchange the Pin-Locator for the RTP Base:
                           
Remove the Pin-Locator by un-snapping it from the Opposing_Base and return it to its assigned storage bin. Attach the RTP Base to the Opposing_Base and insert the necessary pins. Use a metal pin for the prepped tooth and the contacting teeth. Plastic pins can be used in any of the non-critical areas.

Caution: Finger pressure is all that is needed when inserting the die pins. More pressure will result in a die pin that is hard to remove.

Pin-Locators can be used over and over again for quite some time; however, they should be discarded when the hinge action starts getting loose.

Home          Page > 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23