Stalagmite                            Pouring Open_Bases

Arch Open_Base:
   
        

Mounting-Plate is removed and the bottom is sanded with 220 grit wet/dry sandpaper laid on a smooth flat surface. Do not sand away any plastic, just sand until sandpaper barely touches the plastic (it only takes a few strokes). This procedure will relieve any pressure between the base and Mounting-Plate and make it easier to attach and remove the base.

            

Models are cleaned, trimmed if needed and readied for articulation.

Home          Page > 1 2 3 4 5 6 7 8 9 10 11