Stalagmite                            Pouring Open_Bases

Arch Open_Base:

           
Models are ground to correct thickness. Conventional die pins are glued in place and reversible pins (blue) are put firmly into holes. Desired index grooves are cut and separator is applied to bottom of die surface.

The above pictures show only one of many available glue-pin techniques; however, almost all of them will work with the Open_Base.

            
Shown here is a Mounting-Plate being attached to the bottom of a large (orange) Open_Base so it can be filled with stone.

Home          Page > 1 2 3 4 5 6 7 8 9 10 11